Here is a  12V, 25A, Single Output Isolated DC/DC Converter, Positive polarity from Murata Power.

HPQ-12/25-D48PBH-C –  Murata Power Solutions

Murata Power DC DC Converter

“Advanced automated surface mount assembly and planar magnetics deliver galvanic isolation rated at 2250 Vdc for basic insulation. To power digital systems, the outputs offer fast settling to current steps and tolerance of higher capacitive loads. Excellent ripple and noise specifications assure compatibility to CPU’s, ASIC’s, programmable  logic and FPGA’s. ..”

Features Include

  • Industry standard quarter brick 2.3 x 1.45 x 0.49 open frame package
  • Wide range 36 to 75 V DC input voltages with 2250 Volt Basic isolation
  • Up to 300 Watts total output power
  • High efficiency (94.5%) synchronous rectifier topology
  • Stable no-load operation with no required external components

Manufacturing and Assembly of Selective soldering and LTS lead tinning products. They have an integrated Process Laboratory to process the samples.They have X-ray inspection equipment installed for internal post-solder examination and a 40X power microscope for external inspection.

ACE Production Technologies – Selective Soldering Systems

Now Known as Nordson SELECT…The Selective Soldering Specialists

LTS200 Automated Lead Tinning Machine - ACE Production Technologies

LTS-200 Lead Tinning System

The LTS200 is an automated machine specifically intended for the Hi-Rel lead tinning process whereby aged components can be refurbished in preparation for re-qualification to Hi-Rel standards.

The LTS200 system is the mid-range automated lead-tinning system offered by ACE. It features two dynamic nitrogen inerted solder pots, (one dedicated to remove the old finish and any contamination while the other puts on a fresh layer of pure solder alloy), a dynamic flat wave fluxing station and a forced hot air pre-heat station

ACE Production Technologies
3010 N 1st St Spokane Valley, WA 99216, USA.

Japanese chemical engineering and manufacturing company, headquartered in Tokushima, Japan. Specializes in the manufacturing and distribution of phosphors, including light-emitting diodes (LEDs), battery materials, and calcium chloride.

Light Emitting Diode – InGan LED NICHIA

Light Emitting Diode - InGan LED NICHIA

Nichia 219 white LED offers typical 140 lumen output at 1 W input power with 5,000 K color temperature. Using a uniformly phosphor coated chip, Nichia 219 has the industry leading source brightness and tightest optical footprint.

High Power Point Source White Led NVSx219AWe rolled out a better idea

The spatial color uniformity is also optimized with Nichia’s leading phosphor technology. At 350 mA drive current, the typical forward voltage is only 3.0 V. Additionally, this package is capable of drive currents up to 1.5 A.

Japanese chemical engineering and manufacturing company, headquartered in Tokushima, Japan. Specializes in the manufacturing and distribution of phosphors, including light-emitting diodes (LEDs), battery materials and calcium chloride.

NICHIA – Semiconductors and Materials

Products include Ultraviolet LEDs (UV-LEDs), Light Emitting Diode (InGaN LED), LASER DIODEs and Compound Semiconductor Materials. Fine Chemicals and Special Materials for electronic component manufacture.

NICHIA - Semiconductors and Materials

Nichia 219 white LED offers typical 140 lumen output at 1 W input power with 5,000 K color temperature. Using a uniformly phosphor coated chip, Nichia 219 has the industry leading source brightness and tightest optical footprint. The spatial color uniformity is also optimized with Nichia’s leading phosphor technology. At 350 mA drive current, the typical forward voltage is only 3.0 V. Additionally, this package is capable of drive currents up to 1.5 A.”

Shuji Nakamura’s invention of the first high brightness blue-light LED, which was based on gallium nitride lead to the LED Lighting Phenomena.

Electronic components, materials and power supplies to factory automation systems, anechoic chambers, test systems and more.

TDK – Electronic components and Materials

TDK was founded in Japan on 7 December 1935 to manufacture iron-based magnetic material ferrite, which had been recently invented by Yogoro Kato and Takeshi Takei. In 1952 they began production of magnetic tapes, with compact cassette tapes following in 1966; it is for these that the company is most widely noted

TDK - Electronic components and Materials

TDK Museum

Through videos and practical demonstrations, the museum introduces how TDK’s products and technologies, centered on our strength in ferrite and “magnetism”, have played a role in the evolution of society and how TDK will be involved in the coming future society in an easy-to-understand, enjoyable, and experiential manner.

They have unique variety of tools for professionals, hobbyists, and do-it-yourself enthusiasts.The Business started 50 years ago by buying and selling of surplus merchandise from the US Military

PJ Tool & Supply – Papa John’s Toolbox

Invented as surgical tools, hemostat clamps lock in place by clamping the interlocking teeth on each handle together. Constructed of stainless steel and provide a vise type grip when locked.

Hobby grade Hemostat Clamps

Hobby grade Hemostat Clamps

The Helping Hands magnifier is a great hands free device for holding small items in a fixed position for soldering and other intricate work.

Helping Hands Magnifier

Helping Hands Magnifier

PJ Tool & Supply
40-H Corbin Ave. Bay Shore, NY 11706, USA

A leading designer and manufacturer of DIP, tact, pushbutton, toggle, rocker, slide, rotary and encoder switches, keypads and front panels, I/O modules, control systems, wireless products, ruggedized mobile computers, panel computers and computer based devices.

Grayhill – Switches and Encoder

Standard products include optical encoders, rotary switches, keypads, joysticks and pushbuttons; all with finely tuned haptics. Grayhill specializes in creating ergonomic panels and product shells that integrate various interface technologies, including displays, touch technology and motion sensing.

Multi-Touch Ring Encoder T1

Grayhill’s Multi-Touch Ring Encoder with Instinct will aid in the design of uncluttered, easy-to-clean instrumentation…..

Grayhill Multi-Touch Ring Encoder

The Multi-Touch Ring Encoder can replace touchscreens, keypads, trackballs, switches, and joysticks. It integrates three device functions in one:- Multi-Touch Touchpad, Optical Encoder, Pushbutton.Other Usability Features

Impervious to cleaning solutions, Rugged, scratch-resistant surfaces, Backlit illumination, Colored highlight ring.

Grayhill, Inc
561, Hillgrove Avenue, La Grange, IL 60525-5997, USA.