Modules Assemblies (Page 4)

Electronic Products that are used as components in Panels, Equipment and Machines.

By:
On:
In: Modules Assemblies
Tagged:

A leading supplier of environmentally robust Solar Energy Systems. They are Time Proven producers and suppliers of quality solar energy panels.

Kyocera Solar – Solar Electric Energy

Highly efficient multi-crystal photovoltaic modules, Cells encapsulated between a tempered glass cover and an EVA pottant with a PVF back sheet and the laminate is installed in an anodized aluminum frame for structural strength.

KD100-36 Photovoltaic Module Kyocera

KD100-36 Photovoltaic Module Kyocera

Electrical Specs –

  • Maximum Power (Pmax) – 140 W
  • Maximum Power Voltage (Vmpp) – 17.7 V
  • Maximum Power Current (Impp) – 7.91 A
  • Open Circuit Voltage (Voc) – 22.1 V
  • Short Circuit Current (Isc) – 8.68 A

Kyocera Solar, Inc
7812 East Acoma Drive Scottsdale, AZ 85260, USA

By:
On:
In: Electromechanical, Modules Assemblies, Passives
Tagged:

Manufacturer of passive, magnetics and microcircuit modules. The Product Line includes – Trimmer Potentiometers, Precision Potentiometers, Encoders, Hybrid Microcircuits, Passive Networks and Power Resistors too.

BI Technologies – Electronic Components and Modules

“Providing design engineers with an ideal mechanical set-up for applications involving feedback positioning, TT electronics BI Technologies Electronic Components Division has enhanced four of its precision potentiometers.”

This is a 7/8″ Diameter 10-Turn Wirewound Precision Potentiometer, can be used as a Position Sensor too. The two types of Mounting available are Bushing Mount – Sleeve Bearing and Servo Mount – Ball Bearing.

Precision Potentiometers from BI Technologies

Precision Potentiometers from BI Technologies

Some Specs Model 7200

  • 7/8″ Diameter – 10 Turn
  • Wirewound Potentiometer
  • Resistance Range, Ohms 10 to 125K
  • Standard Resistance Tolerance ±3%
  • Independent Linearity ±0.25%

BI Technologies Corporation
4200 Bonita Place Fullerton, CA 92835-1053, USA

By:
On:
In: Energy and Power, Modules Assemblies, Passives
Tagged: , ,

Electrocube is among the industry’s most-respected design manufacturers of passive electrical components for a wide range of standard and custom applications.

Electrocube – Custom Film Capacitors EMI Filters

Electrocube - Custom Film Capacitors EMI Filters

Electrocube manufactures made-to-order, one-of-a-kind precision components, They custom-design and manufacture fill capacitors and RC networks as well as transformers.

  • Film Capacitors, AC/DC, IGBT, Banks
  • EMI Filters, High Rel. Custom
  • Foil Transformers, Transformer Rectifier Units
  • RC (Resistor Capacitor) Networks, Circuit Protection
  • Many other related custom products

Custom EMI Filters
Full custom design, manufacture and testing, complete inductor winding and filter production facilities.

Electrocube, Inc
3366 Pomona Blvd. Pomona CA 91768

By:
On:
In: Modules Assemblies, Passives
Tagged:

Maxwell ultracapacitor products provide energy storage and power delivery solutions. Aerospace products and services include radiation‐hardened microelectronics like single board computers and components such as high‐density memory and power modules.

Maxwell – Energy and Power Delivery Solutions

The also manufacture special high‐voltage capacitors for long term reliability and environment ruggedness. Types are grading and coupling capacitors; capacitive voltage dividers.

“BOOSTCAP ultracapacitor cells and multi-cell packs and modules provide safe and reliable power solutions for applications in consumer and industrial electronics, transportation and telecommunications…”

The K2 Series ultracapacitors are a third generation design that provides 2.7 volt operating voltage while improving Maxwell’s high performance and high reliability on a high volume manufacturing platform.

K2 Series High Capacity Cells – Maxwell

K2 Series High Capacity Cells - Maxwell
Some Features

  • 2.7 V operating voltage
  • Lowest RC time constant
  • Over 1,000,000 duty cycles
  • Ultra-low internal resistance

Maxwell Technologies, Inc.
3888 Calle Fortunada San Diego CA 92123 USA

By:
On:
In: Energy and Power, Modules Assemblies
Tagged:

Corcom filters are recognized worldwide for providing EMI/RFI filtering solutions. All Corcom filters have been designed and tested for susceptibility and/or emissions applications, and have received approval from major safety agencies throughout the world, including UL, CSA and VDE.

Corcom – EMI RFI Filter Technology

Some of the types are for Medical Applications, Three Phase Power, Power Inlet, Power Entry Modules and DC Applications.

Signal Line Filters – RJ11, RJ45 and board level filter solutions for signal line noise and cross talk.

Power Line Filters – Solutions for equipment susceptibility and international emissions standards for EMI/RFI.

Medical Power Line Filters

Medical Power Line Filters - Corcom

These are suitable for use in medical equipment with previously offered current ratings of 3A-15A and are suitable for medical applications with increased current ratings that require minimal leakage current.

Understanding RFI Power Line Filters

What Is a Power Line Interference Filter?

A power Line interference filter is a primary tool available to the designer of electronic equipment to control conducted RFI both into the equipment (potential equipment malfunction) and out of the equipment….

Since the largest component of leakage current is usually from the power line filter, it is prudent to set a maximum leakage current limit for the filter itself……..

leakage current

By:
On:
In: Modules Assemblies
Tagged:

OEM Power Supply Resource Inverters, Converters and Adapter. They help you in selecting the proper power supply as they have the experience and the Specialists.

Current Solutions OEM Power Products

They match your product with the ideal power supply taking into account all the intricate variables..

Product Range Includes

  • Open Frame, Enclosed and PC ATX
  • DC/AC Inverters and DC/DC Converters
  • AC/DC Power Supplies
  • Rackmount, Din-Rail and PCB Mount

Current Solutions OEM Power Products

Inverter S150 from Cotek 

This is a True Sine Wave Output Inverter with a THD 6% Typ. It is DC to AC Conveyor. That means you use Batteries to derive a High Voltage AC like the Mains Utility Supply.

The output selection of 100/110/120 VAC covers the US region and similar areas. The input being 12VDC / 24VDC.  This is a small 150 Watts unit ideal for Small Solar power systems and lighting.

Specifications Include

  • Input & output fully isolation
  • Input polarity reverse / under voltage / over voltage protections
  • Output short circuit / overload / over temperature protections
  • Capable of driving highly reactive and capacitive loads

Current Solutions, Inc.
P.O. Box 1538, Land O’ Lakes, FL 34639-3929, USA.

By:
On:
In: Modules Assemblies
Tagged:

Century Electronics – High Reliability Power Systems

High technology organization dedicated to the development and manufacturing of high reliability power supplies, converters and inverters .

DC18-15 Century Electronics

The Products include custom high performance power conversion solutions. These are AC to DC power supplies, DC to DC converters, DC to AC inverters and VME systems.

DC18-15 Series

This is a DC to DC Convertor with a high MTBF. Equipped with a MIL-STD-461 EMI Filter. It has a 70% Efficiency with low Ripple and Noise of 75mVp-p.

Century Electronics a Division of Perillo Industries Inc
2150 Anchor Court Newbury Park, CA 91320 USA