Modules Assemblies (Page 2)

Electronic Products that are used as components in Panels, Equipment and Machines.

Tyco Electronics designs, manufactures and markets engineered electronic components, these are passive electronic components which include connectors and interconnect systems, relays, switches, circuit protection devices, touchscreens, sensors, and wire and cable.

Tyco Electronics – TE Connectivity

  • Electronic Components, Electromechanical
  • Copper and Fiber Network Solutions
  • Advanced Communications Systems

Rugged Fiber Optics enable data delivery at high speed and over long distance to a level not possible with traditional copper cable…

TE’s ASIC (application-specific integrated circuit) to ASIC end-to-end solutions include a comprehensive range of connectors, cables, Optical Flex Circuitry, routers, switches, passive, active and electro optic devices

SuperDrum - TE Connectivity

SuperDrum integrated reels, which integrate cables, connectors, and media conversion.

TE AD&M Fiber Optics Product & Application Summary

This product solution set employs electro optic devices such as switch / routers inclusive of Wavelength Division Multiplexing, active devices, as well as harness and interconnect designs that employ low loss / low noise Physical Contact and or Expanded Beam connectors and fiber optic cable designs

This sensor is based on a unique capacitive cell, this affordable sensor is used in applications such as office automation, HVAC and home appliances and process control too.

HS1101LF Humidity Sensor – Measurement Specialties

This sensor sports a fast response time and very low temperature coefficient. It also has High reliability and long term stability of Parameters.

Humidity Measuring Range 1% – 99% RH. Nominal capacitance at 55% RH is 180 pF.

HS1101LF Humidity Sensor

A Humidity to Frequency Convertor to make a Easy Digital Counter or Embedded Interface using the venerable 555 is shown below.

555 Humiidity Circuit
Correction – R4=49.9kΩ /  RV1=50 kΩ potentiometer.

“Measurement Specialties is a global designer and manufacturer of sensors and sensor-based systems which measure pressure/force, position, vibration, temperature, humidity, and fluid properties.”

Measurement Specialties
1000, Lucas Way Hampton, VA 23666 United States.

This water proof, chemical resistant, low drift Humidity and Temperature module from IST :provides a fully calibrated and compensated humidity and temperature digital signal output.

HYT 271 Humidity Temperature Module – IST AG

The Digital output is for a I2C interface in a 14 bit resolution. Accuracy at 23 °C is +/- 1.8 % RH  in the span of 0 % RH to 80 % RH. This reading comes with a Response time of less than 4 seconds.

Humidity Temperature Module - IST AG

They also have a LabKit with USB Interface to evaluate and implement in your system.

“The Labkit was developed as a Plug&Play tool for a  fast evaluation of the HYGROCHIP digital humidity  sensors. The ready-to-use system consists of a  PC-adapter with an USB connecting wire, a connection adapter with plugs for all product variants.”

Component level. manufacturer of thin-film RTD temperature sensors, capacitive humidity sensors, mass flow sensors and conductivity sensors.

Innovative Sensor Technology IST AG
Stegrütistrasse 14 9642 Ebnat-Kappel Switzerland

Versatile and Replaceable Digital humidity sensor, a cost-effective component. In the SHT family the capacitive humidity sensors are fully calibrated and provides a digital output ready for interface.

Digital Humidity and Temperature Sensor SHT71

Each SHT7x is individually calibrated in a precision humidity chamber. The calibration coefficients are programmed into an OTP memory on the chip. These coefficients are used to internally calibrate the signals from the sensors. The 2-wire serial interface and internal voltage regulation allows for easy and fast system integration.

Digital Humidity and Temperature Sensor SHT71

The power consumption of around 80uW makes it ideal for battery operated devices. It measures the full span of  0-100% RH with a response time of 8 sec. The temperature range being -40 – +125°C.

Humidity Sensor SHT71 Schematic

SCK is used to synchronize the communication between microcontroller and SHT7x. The DATA tri-state pin is used to transfer data in and out of the sensor.

Sensirion is the leading manufacturer of high-quality sensors and sensor solutions for the measurement and control of humidity, and of gas and liquid flows.

Sensirion AG
Laubisruetistrasse 50, 8712 Staefa ZH, Switzerland.

MZS is an EMI RFI Filter for equipment designed to conform EMI regulations such as VCCI, CISPR, FCC, EN, etc. These are mounted within Control Panels or Cabinets. Metal Enclosures that are grounded are Ideal for use along with this filter.

MZS Single Phase Noise Filter – TDK Lambda

MZS Single Phase Noise Filter - TDK Lambda

Swicth Boards and Meter Boxes also can use this for lines going to Sensitive Equipment. These along with MCB and ELCB make Mains Power Safer and Cleaner. – delabs

Features Include

  • Attenuation effect against high voltage pulse noise.
  • Attenuates conductive emission from power supply.
  • Leakage current:1mA max..(250V,60Hz)
  • Rated Current – 6-20A Type Numbers
  • Leakage Current 1mA max at AC250V 60Hz

from TDK Lambda

TDK-Lambda Corporation
3-9-1, Shibaura, Minato-ku, Tokyo 108-0023, JAPAN

Continental Industries was instrumental in the initial development of an integrated solid state relay and heat sink as an integral module used in Energy and Process Automation Industries.

Continental Industries – Solid State Relays

The manufacture Cost effective automation components like..Solid state relays, Mini Input Modules, Mini Output Module.

DIN Rail Mounted Mini Input Output Modules

DIN Rail Mounted Mini Input/Output Modules

“IO Series The IO Series of Mini Input/Output modules provide a high density, DIN Rail mountable device for low power heating loads or conversion of ac or dc control logic levels to a low level dc signal.”

Features Include : 3 amps 12-280V ac, AC and DC inputs, AC and DC outputs, Positive and negative logic  Output modules internally fused, Optically isolated.

Continental Industries now part of Invensys Eurotherm.

“Eurotherm is one of the world’s best known suppliers of Control and Measurement Instrumentation to Industrial and Process Markets. ….. part of Invensys plc”

Invensys Eurotherm USA
44621 Guilford Drive, Suite 100 Ashburn, Virginia 20147, USA.

The new high-performance module Q.PLUS BFR-G4.1 is the ideal solution for all applications thanks to its innovative Q.ANTUM cell technology. The world-record cell design was developed to achieve the best performance under real conditions – evenwith low radiation intensity and on clear, hot summer days.

Q.PLUS BFR-G4.1 – Solar Module – Q-Cells

Q PLUS BFR-G4.1 - Solar Module - Q-Cells

Solar panels with Q.ANTUM technology achieve high module efficiencies of up to 17.1 % and are characterized by above average durabilities and high operational safety. Like all Q CELLS solar panels, installation is quickly and easily done to guarantee immediate use.

From – Q-Cells

Solar cell manufacturer, a photovoltaic company. Design and Manufacture of powerful solar cells made out of monocrystalline and multicrystalline silicon. Photovoltaic project developers.

Hanwha Q CELLS Co. Ltd.
OT Thalheim, Sonnenallee 17 – 21, 06766 Bitterfeld-Wolfen, Germany