Since 1994, Ametherm has provided the most reliable and effective inrush current limiting solutions available.
Ametherm – Inrush Current Limiters and Thermistors
They have newly developed the MS 35 Series Inrush Current Limiters that are capable of handling up to 900 joules of energy and 50 amperes of steady state current. This will be a useful component to consider for power electronics engineers in the design of power supplies and inverters.
Protect An Inverter From Inrush Current
A common failure of inverters is overloading the inverter due to inrush current . This is due to the fact that most inverters are designed with a minimum amount of resistance to increase their efficiency and minimize losses due to heat.
Surge-Gard Inrush Current Limiters
NTC Thermistors – Negative Temperature Coefficient (NTC) thermistors are thermally sensitive semiconductor resistors which exhibit a decrease in resistance as absolute temperature increases.
SURGE-GARD Inrush current limiting devices have specially formulated metal oxide ceramic materials. These devices are capable of suppressing high inrush current surges.
(AMETHERM Acquires SURGE-GARD Inrush Current Limiter Product Line from Measurement Specialties – October 1st, 2013)
961 Fairview Carson City Nevada 89701, USA
Manufacturer of passive, magnetics and microcircuit modules. The Product Line includes – Trimmer Potentiometers, Precision Potentiometers, Encoders, Hybrid Microcircuits, Passive Networks and Power Resistors too.
BI Technologies – Electronic Components and Modules
“Providing design engineers with an ideal mechanical set-up for applications involving feedback positioning, TT electronics BI Technologies Electronic Components Division has enhanced four of its precision potentiometers.”
This is a 7/8″ Diameter 10-Turn Wirewound Precision Potentiometer, can be used as a Position Sensor too. The two types of Mounting available are Bushing Mount – Sleeve Bearing and Servo Mount – Ball Bearing.
Precision Potentiometers from BI Technologies
Some Specs Model 7200
- 7/8″ Diameter – 10 Turn
- Wirewound Potentiometer
- Resistance Range, Ohms 10 to 125K
- Standard Resistance Tolerance ±3%
- Independent Linearity ±0.25%
BI Technologies Corporation
4200 Bonita Place Fullerton, CA 92835-1053, USA
Electrocube is among the industry’s most-respected design manufacturers of passive electrical components for a wide range of standard and custom applications.
Electrocube – Custom Film Capacitors EMI Filters
Electrocube manufactures made-to-order, one-of-a-kind precision components, They custom-design and manufacture fill capacitors and RC networks as well as transformers.
- Film Capacitors, AC/DC, IGBT, Banks
- EMI Filters, High Rel. Custom
- Foil Transformers, Transformer Rectifier Units
- RC (Resistor Capacitor) Networks, Circuit Protection
- Many other related custom products
Custom EMI Filters
Full custom design, manufacture and testing, complete inductor winding and filter production facilities.
3366 Pomona Blvd. Pomona CA 91768
In the 1940s radio was an important means of communication. Super heterodyne radio used Murata’s tubular 500pf ceramic capacitors with titanium oxide as dielectric material for temperature compensation.
Murata Manufacturing – Electronic Components
Passive components like Capacitors, Resistors, Thermistors, Coils(Inductors), Delay Lines, Resonators, Noise Suppression Products and EMI Suppression Filters.
Audio Visual Parts like Spherical Speaker Products, Sound Components Filters, Modules for Audio Visual Equipment,
They also have Components and Modules for Communication Equipment. Special Sensors and Optical Products.
Reasons for requiring EMI suppression filters
Chapter 1 describes the reasons for using EMI suppression filters, and explains how shields and filters used for electromagnetic noise suppression work.
Bluetooth Smart module TypeVZ is a plug-in device that supports Bluetooth 4.0 low energy standard. All protocol stacks required for Bluetooth low energy communication are built in and it enables the module to be easily controlled by 8-bit or 16-bit MCUs widely used in small embedded devices.
Schott Magnetics designs and manufactures custom and standard inductors, transformers, coils, toroid magnetics, chokes and custom designed magnetic components.
Schott Magnetics – Inductors Transformers Coils
Cost effective transformers and inductors for the power supply, avionics, military, medical, test & measurement, industrial, automotive and commercial applications.
“Schott began as a part-time home business in 1946 by its founder, Oscar A. Schott. Due to Oscar’s unique talents in electrical engineering, many companies approached Oscar to build prototype transformers and coils. In 1951, Schott became a full time corporation.”
SMU1330 Series Drum Core Inductors
High energy storage and low resistance, Ideal for DC-DC step-up or step-down conversion, Reliable surface mounting, flat top for pick and place.
Schott Sales and Engineering
210 St. Olaf Ave, N. Canby, MN 56220, USA.
Nippon Chemi-Con. Products multilayer ceramic capacitors, film capacitors, metal oxide varistors, choke coils, optomechatronics and Aluminum electrolytic capacitors.
Aluminum Electrolytic Capacitors – Nippon
New Technologies – Hgh capacity electric double layer capacitors and newly designed decoupling device Proadlizer. Electric Double Layer Capacitor (EDLC) or SuperCapacitor.
They have a range of Supercapacitors upto 2500F at 2.5V and Modules like 400F at 15V. There are two types Prismatic and Cylindrical. In comparison to batteries, multi-million cycles of charge-discharge is possible.
DLCAP – Electric Double Layer Capacitor – Nippon
Another feature is the high current charge-discharge ability, useful in many Industrial and Automotive Applications. A high charge-discharge efﬁciency makes an output efﬁciency of around 95% possible. These capacitors have become an useful part of Alternative Energy Electronics and Energy Harvesting. They also have applications in Electric and Hybrid Vehicles.
Maxwell ultracapacitor products provide energy storage and power delivery solutions. Aerospace products and services include radiation‐hardened microelectronics like single board computers and components such as high‐density memory and power modules.
Maxwell – Energy and Power Delivery Solutions
The also manufacture special high‐voltage capacitors for long term reliability and environment ruggedness. Types are grading and coupling capacitors; capacitive voltage dividers.
“BOOSTCAP ultracapacitor cells and multi-cell packs and modules provide safe and reliable power solutions for applications in consumer and industrial electronics, transportation and telecommunications…”
The K2 Series ultracapacitors are a third generation design that provides 2.7 volt operating voltage while improving Maxwell’s high performance and high reliability on a high volume manufacturing platform.
K2 Series High Capacity Cells – Maxwell
- 2.7 V operating voltage
- Lowest RC time constant
- Over 1,000,000 duty cycles
- Ultra-low internal resistance
Maxwell Technologies, Inc.
3888 Calle Fortunada San Diego CA 92123 USA